Technological conditions for ensuring the stability of the array of enclosing rocks during the fastening of mine workings
DOI:
https://doi.org/10.31643/2024/6445.31Keywords:
mining, fastening parameters, geomechanical processes, anchorage, manifestations of rock pressure, technological schemesAbstract
Ensuring the stability of the array of enclosing rocks during the fastening of mine workings is possible only if there is a highly efficient technology for conducting and maintaining workings. For fixing the mining, taking into account the technological stratification of coal-bearing massifs, a method using anchor fastening technology is recommended. The effect of the proposed method of fastening workings is that high reliability of fastening is ensured, and the volume of labor-intensive processes to combat the collapse and stratification of rocks is reduced. The stability of the contours of preparatory workings, taking into account their stress-strain state, depending on mining, geological, and technological factors of factors using the finite element method, is investigated. The boundaries of the area of inelastic deformations are determined by the method of successive loadings. The parameters of deformation of the lateral rocks of the mine workings from the angle of incidence of the formation and the depth of anchoring are considered.
Downloads
References
Krukovskyi O,Bulich Y,Kurnosov S,Yanzhula O,Demin V.Substantiating the parameters for selecting a pillar width to protect permanent mine workings at great depths. IOP Conference Series: Earth and Environmental Science. 2023; 1156(1):012024. https://doi.org/10.1088/1755-1315/1156/1/012024
Zholmagambetov N, Khalikova E, Demin V, Balabas A, Abdrashev R, & Suiintayeva S. Ensuring a safe geomechanical state of the rock mass surrounding the mine workings in the Karaganda coal basin, Kazakhstan.Mining of Mineral Deposits. 2023; 17(1):74-83. https://doi.org/10.33271/mining17.01.074
Badtiev B, Salvasser I, Kuzmin S. Issledovaniya na modelyakh iz ekvivalentnykh materialov effektivnosti metodov bor'by s pucheniyem izmeneniyem formy poperechnogo secheniya vyrabotok [Studies on models from equivalent materials of the effectiveness of methods to combat heaving by changing the shape of the cross-section of workings]. Geodezicheskiy vestnik: Giprotsvetmet[Surveying Bulletin: Giprotsvetmet].2015; 4:51-55. (in Russ.). https://mvest.su/ru/editions/2015/39-4-2015
Brady B, Brown E. Rock Mechanics for underground mining. Dordrecht: Kluwer Academic Publishers.2004.
Bobylev YG, Korshunov GI. and others. Combined and anchor bolting installation in coal mines excavations . St. Petersburg International Academy of Ecology, Man and Nature.2009.
Drizhd N, Rabatuly M, Aleksandrov A, Balniyazova G, Zhunis G. Rezul'taty razrabotki pilotnykh skvazhin na Sherubaynurinskom uchastke Karagandinskogo ugol'nogo basseyna [The results of the development of pilot wells in the sherubainurinsky site of the Karaganda coal Basin]. Ugol. 2020; 6:36-40. https://doi.org/10.18796/0041-5790-2020-6-36-40
Rabatuly M, Musin R, Demin V, Kenetayeva A, Usupaev Sh. Improving the efficiency of methane extraction from coal seams. Kompleksnoe Ispolzovanie Mineralnogo Syra= Complex Use of Mineral Resources. 2023; 324(1):5-11. https://doi.org/10.31643/2023/6445.01
Zhumabekova A, Tahanov D, Hussan B, Nemova N. Technological solutions development for mining adjacent rock mass and pit reserves taking into account geomechanical assessment of the deposit . Scientific Bulletin of the National Mining University, Journal. Dnepropetrovsk. 2020;2:17-24. http://dspace.opu.ua/jspui/bitstream/123456789/10470/1/%D0%9D%D0%93%D0%A32020.pdf
Tolovkhan B, Smagulova A, Krukovskyi O, Zairov S, Cabana E. Substantiating the rock mass control parameters based on the geomechanical model of the Severny Katpar deposit, Kazakhstan Mining of Mineral Deposits. 2022; 16(3):123-133. https://doi.org/10.33271/mining16.03.123
Demin V, Nemova N. Assessment of the stability of capital and preparatory workings when creating technological schemes. Fundamental and applied issues of mining sciences. Novosibirsk, IA Chinakal IGD SB RAS. 2019; 6(1):68-73. ISSN 2313-5794. https://doi.org/10.15372/FPVGN2019060212
Dymin V, Abekov U, Ivadilinova D. Tekhnologicheskiye skhemy, sposoby, vidy i sredstva krepleniya konturov gornykh vyrabotok v slozhnykh gorno-geologicheskikh usloviyakh ekspluatatsii [Technological schemes, methods, types and facilities for supporting mine working contours in complical mining and geological operational conditions]. Gornyy zhurnal Kazakhstana [Mining Magazine of Kazakhstan]. 2019, 42-44. (in Russ.).
Khalikova E, Diomin V, Diomina T, Zhurov V. Studying coal seam bedding tectonic breach impact on supporting parameters of mine workings with roof bolting. Scientific Bulletin of the National Mining University, Journal.Dnepropetrovsk. 2019; 5:16-21. https://doi.org/10.29202/2019-5/5
Zhumabekova A, Demin V, Portnov V, Demina T. Investigation of the deformed state of the near-contour coal-rock mass around a mine working with anchor fastening. LLC Editorial office of the magazineCoal. 2019;7:72-77. https://cyberleninka.ru/article/n/issledovanie-deformirovannogo-sostoyaniya-prikonturnogo-ugleporodnogo-massiva-vokrug-gornoy-vyrabotki-s-ankernym-krepleniem
Batyrkhanova A, Tomilov A, Zhumabekova A, Abekov U, Demin V. Developing technological schemes of driving workings with controlled resistance of contours. Scientific Bulletin of the National Mining University, Journal. Ukraine, Dnipro. 2019;3:22-28. http://www.nvngu.in.ua/jdownloads/pdf/2019/03/03_2019_Dyomin.pdf
Drizhd N, Mussin R, Alexandrov A. Improving the Technology of Hydraulic Impact Based on Accounting Previously Treated Wells International science and technology conference Earth science. IOP Conf. Series: Earth and Environmental Science. IOP Publishing. 2019; 272(2):022031. https://doi.org/10.1088/1755-1315/272/2/022031
Matayev A, Kainazarova A, Arystan I, Abeuov Ye, Kainazarov A, Baizbayev M, Demin V, Sultanov M. Research into rock mass geomechanicalsituation in the zone of stope operations influence at the 10th Anniversary of Kazakhstan’s Independence mine. Mining of Mineral Deposits. 2021; 15(1):1-10. https://doi.org/10.33271/mining15.01.042
Matayev A, Lozynskyi V, Musin R, Abdrashev R, Kuantay A.S, Kuandykova A. Substantiating the optimal type of mine working fastening based on mathematical modeling of the stress condition of underground structures. 2021; 3:57-63. https://doi.org/10.33271/nbngu/2021-3/057
Issabek T, ImashevA, BakhtybayevN, Zeitinova Sh. To the problem of selecting vertical shafts location with combined geotechnology of developing deposits.Scientific Bulletin of the National Mining University,Journal,Dnepropetrovsk. 2019,5-12. https://doi.org/10.29202/nvngu/2019-2/3
Demin V, Demina T, Mussin R, Zhumabekova A. Study of edge protecting anchors influence on soil heaving of the mine working. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences. 2020;5 (443):71-80. https://doi.org/10.32014/2020.2518-170X.106
Krukovskyi O, Krukovska V, Vynohradov Y, Dyomin V. Application of roof bolting to reduce water inflow into mine workings during the crossing of tectonic faults. E3S Web of Conferences. 2021; 280:01006. https://doi.org/10.1051/e3sconf/202128001006
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Khalikova, E., Demin, V., Demina, T., Syzdykbaeva, D., & Zairov, S.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 Unported License.
