Recycling of beryllium, manganese, and zirconium from secondary alloys by magnesium distillation in vacuum

Authors

  • V.N. Volodin Institute of Metallurgy and Ore Beneficiation; Satbayev University
  • R.A. Abdulvaliyev Institute of Metallurgy and Ore Beneficiation; Satbayev University
  • S.A. Trebukhov Institute of Metallurgy and Ore Beneficiation; Satbayev University
  • A.V. Nitsenko Institute of Metallurgy and Ore Beneficiation; Satbayev University
  • X.A. Linnik Institute of Metallurgy and Ore Beneficiation; Satbayev University

DOI:

https://doi.org/10.31643/2024/6445.42

Keywords:

magnesium, beryllium, manganese, zirconium, phase diagram, vapor-liquid equilibrium.

Abstract

One of the methods for processing secondary magnesium raw materials containing rare refractory metals can be a distillation with the extraction of magnesium into condensate and the accumulation of rare metals in the distillation residue. The residue can be used as a master alloy for special alloys. To justify the possibility of this process, we calculated the boundaries of the vapor-liquid equilibrium fields for the regions of liquid solutions existence in the Mg – Be, Mg – Mn, and Mg – Zr systems at atmospheric pressure (101.33 kPa) and in vacuum (1.33 kPa). The value of the vacuum is due to the fact that a further increase in rarefaction will lead to the magnesium crystallization from the melt, and it will complicate the technology.We established that in the distillation process of magnesium removal from Mg – Be and Mg – Zr alloys, the vapor phase will be represented by more than 99.95 of magnesium. The presence of 0.45 mass.% Mn is possible in the Mg – Mn system at 1000 °C in thevapor phase – condensate . However, results of preliminary tests of the evaporation intensity established that the process conducted at 850-900 °C provides an acceptable evaporation rate of the volatile component (Mg) for technological conditions.Thus, we confirmed the possibility of the proposed method to process secondary light alloys containing beryllium, manganese, and zirconium, which can be involved in the main process intended to produce special alloys in the form of a master alloy with magnesium.

Downloads

Download data is not yet available.

Author Biographies

V.N. Volodin, Institute of Metallurgy and Ore Beneficiation; Satbayev University

Doctor of Technical Sciences, Professor, Chief Researcher of the Vacuum Processes Laboratory of Institute of Metallurgy and Ore Beneficiation, Satbayev University, Shevchenko str., 29/133, 050010, Almaty, Kazakhstan.

R.A. Abdulvaliyev, Institute of Metallurgy and Ore Beneficiation; Satbayev University

Candidate of Technical Sciences, Head of the Laboratory of Alumina and Aluminium of the Institute of Metallurgy and Ore Beneficiation, Satbayev University, Shevchenko str., 29/133,  050010, Almaty, Kazakhstan.

S.A. Trebukhov, Institute of Metallurgy and Ore Beneficiation; Satbayev University

Candidate of Technical Sciences, Professor, Leading Researcher of the Laboratory of Vacuum Processes Institute of Metallurgy and Ore Beneficiation, Satbayev University, Shevchenko str., 29/133, 050010, Almaty, Kazakhstan.

A.V. Nitsenko, Institute of Metallurgy and Ore Beneficiation; Satbayev University

Candidate of Technical Sciences, Head of the Vacuum Processes Laboratory of Institute of Metallurgy and Ore Beneficiation, Satbayev University, Shevchenko str., 29/133, 050010, Almaty, Kazakhstan.

X.A. Linnik, Institute of Metallurgy and Ore Beneficiation; Satbayev University

Master of Technical Sciences, Junior Researcher of the Vacuum Processes Laboratory of Institute of Metallurgy and Ore Beneficiation, Satbayev University, Shevchenko str., 29/133, 050010, Almaty, Kazakhstan.

References

Rams J, Torres B, Pulido-González N, Garcia-Rodriguez S. Magnesium Alloys: Fundamentals and Recent Advances. Encyclopedia of Materials: Metals and Alloys. 2022; 1:2-10. https://doi.org/10.1016/B978-0-12-819726-4.00082-X

Satya Prasad SV, Prasad SB, Verma K, Kumar Mishra R, Kumar V, Singh S. The role and significance of Magnesium in modern day research-A review. Journal of Magnesium and Alloys. 2022; 1(10):1-61. https://doi.org/10.1016/j.jma.2021.05.012

Yang Y, Xiong X, Chen J, Peng X, Chen D, Pan F. Research advances of magnesium and magnesium alloys worldwide in 2022. Journal of Magnesium and Alloys. 2023; 8(11):2611-2654. https://doi.org/10.1016/j.jma.2023.07.011

She J, Zhou SB, Peng P, Tang AT, Wang Y, Pan HC., Yang CL, Pan FS. Improvement of strength-ductility balance by Mn addition in Mg –Ca extruded alloy. Materials Science and Engineering: A. 2020; 772:138796. https://doi.org/10.1016/j.msea.2019.138796

Li CC, Xia ZH, Qiao XG, Golovin IS, Zheng MY. Superior ductility Mg –Mn extrusion alloys at room temperature obtained by controlling Mn content. Materials Science and Engineering: A. 2023; 869:144508. https://doi.org/10.1016/j.msea.2022.144508

Wang T, Hua Z, Wang C, Zha M, Gao Y, Wang H. Realizing impressive superplasticity in a low-alloyed Mg –Zn –Ca –Al –Mn alloy: The roles of grain boundary segregation and dense β-Mn particles. Journal of Magnesium and Alloys. 2023; 31 July. https://doi.org/10.1016/j.jma.2023.05.014

Patel S, Rao V. Microstructure, mechanical properties and corrosion behavior of Mg –Cu and Mg –Cu –Mn alloys. Materialstoday: Proceedings. 2023; 7 July. https://doi.org/10.1016/j.matpr.2023.06.284

Somekawa H, Naito K. Grain boundary plasticity at intermediate temperatures in fine-grained Mg –Mn ternary alloys. Journal of Alloys and Compounds. 2023; 942:169012. https://doi.org/10.1016/j.jallcom.2023.169012

Dang C, Wang J, Wang J, Yu D, Zheng W, Xu C, Wang Z, Feng L, Chen X, Pan F. Simultaneous improvement of strength and damping of Mg –Mn alloy by tailoring bimodal grain structure. Vacuum. 2023; 215:112275. https://doi.org/10.1016/j.vacuum.2023.112275

Qian M, Stjohn DH, Frost MT. Characteristic zirconium-rich coring structures in Mg–Zr alloys. ScriptaMaterialia. 2002; 9(46):649-654. https://doi.org/10.1016/S1359-6462(02)00046-5

Qian M, Zheng L, Graham D, Frost MT, Stjohn DH. Settling of undissolved zirconium particles in pure magnesium melts. Journal of Light Metals. 2001; 3(1):157-165. https://doi.org/10.1016/S1471-5317(01)000098

Qian M, StJohn DH, Frost MT. Heterogeneous Nuclei size in magnesium –zirconium alloys. ScriptaMaterialia. 2004;8(50) P:1115-1119. https://doi.org/10.1016/j.scriptamat.2004.01.026

Qian M, Das A. Grain refinement of magnesium alloys by zirconium: Formation of equiaxed grains. ScriptaMaterialia. 2006; 5(54):881-886. https://doi.org/10.1016/j.scriptamat.2005.11.002

Zhou H, Hou R, Yang J, Sheng Y, Li Z, Chen L, Li W, Wang X. Influence of Zirconium (Zr) on the microctructure, mechanical properties and corrosion behavior of biodegradable zinc –magnesium alloys. Journal Alloys and Compounds. 2020; 840:155792. https://doi.org/10.1016/j.jallcom.2020.155792

Chen Y, Ying T, Yang Y, Wang J, Zeng X. Regulating corrosion resistance of Mg alloys via promoting precipitation with trace Zr alloying. CorrosionScience. 2023; 216:111106. https://doi.org/10.1016/j.corsci.2023.111106

Zheng T, Hu Y, Jiang B, Fu L, Pan F, Nang A. A comparative study of deformation behaviors and ductility improvement in Mg –Gd –Zr and Mg–Zr cast alloys. Journal of Materials Research and Technology. 2023; 26:2082-2102. https://doi.org/10.1016/j.jmrt.2023.08.052

Zhong L, Wang L, Dou Y, Wang Y. Critical role dynamic precipitation on enhanced creep resistance in Mg –Zn alloy by Mn substitution for Zr. Journal of Materials Research and Technology. 2023; 24:9082-9095. https://doi.org/10.1016/j.jmrt.2023.05.130

Ablakatov IK, Ismailov MB, Mustafa LM, Sanin AF. Investigation of the Technology of Introducing Li, Mg and Zr Alloys into Aluminum Alloy. Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources. 2023; 4(327):32-40. https://doi.org/10.31643/2023/6445.37

Zhapbasbayev UK, Ramazanova GI, Retnawati H, Sattinova ZК. Digitalization of the thermoplastic beryllium oxide slurryforming process using ultrasonic activation. Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Useof Mineral Resources. 2024; 3(330): 5-12. https://doi.org/10.31643/2024/6445.23

Zeng XQ, Wang QD, Lü YZ, Ding WJ, Lu C, Zhu YP, Zhai CQ, Xu XP. Study on ignition proof magnesium alloy with beryllium and rare earth additions. Scripta Materialia. 2000; 5(43):403-409. https://doi.org/10.1016/S1359-6462(00)00440-1

Xiaogin Z, Qudong W, Yizhen L, Yanping Z, Wenjiang D, Yunhu Z. Influence of beryllium and rare earth additions on ignition-prof magnesium alloys. Journal of materials Processing Technology. 2001; 1(112):17-23. https://doi.org/10.1016/S0924-136(00)00854-2

Cao P, Qian M, StJohn DH. Grain coarsening of magnesium alloys by beryllium. Scripta Materialia. 2004; 7(51):647-651. https://doi.org/10.1016/j.scriptamat.2004.06.022

Tan Q, Mo N, Jiang B, Pan F, Atrens A, Zhang M. Oxidation resistance of Mg –9Al –1Zn alloys micro-alloyed with Be. Scripta Materialia. 2016; 115:38-41. https://doi.org/10.1016/j.scriptamat.2015.12.022

Tan Q, Mo N, Jiang B, Pan F, Atrens A, Zhang M. Combined influence of Be and Ca on improving the high-temperature oxidation resistance of the magnesium alloy Mg–9Al–1Zn. Corrosion Science. 2017; 122:1-11. https://doi.org/10.1016/j.corsci.2017.03.023

Zhao Y, Xu Y, Chen P, Yuan Y, Qian Y, Li Q. Structural and electronic properties of medium-sized beryllium doped magnesium BeMgnclusters and their anions. Results in Physics. 2021; 26:104341. https://doi.org/10.1016/j.rinp.2021.104341

Clark JB, Richter PW. The determination of composition temperature-pressure phase diagrams of binary aloe systems. Proceedings 7th International AIRAPT Conference “High Pressure Science and Technology”; 1979 Le Creusot, Oxford. 1980; 1:363-371.

Malyshev VP, Turdukozhayeva AM, Ospanov EA, Sarkenov B. Vaporizability and boiling of simple substances. Мoscow: ScientificWorld. 2010, 304.

Nitsenko A, Volodin V, Linnik X, Burabaeva N, Trebukhov SA. Melt-Vapor Phase Transition in the Aluminum –Selenium System in Vacuum. Metals. 2023; 7(13):1297. https://doi.org/10.3390/met13071297

Darken LS, Gurry RW. Physical chemistry of Metals. New York, Toronto, London: McGraw-Hill Book Company. INC. 1953, 570.

Morachevsky AG. Thermodynamics of molten metal and salt systems. Мoscow: Metallurgy. 1987, 240.

State diagrams of double metallic systems: Reference book. Ed. by Lyakishev N.P. М.: Engineering 1996,992.

State diagrams of double metallic systems: Reference book. Ed. by Lyakishev N.P. М.: Engineering 2001,872.

Downloads

Published

2024-01-12

How to Cite

Volodin, V., Abdulvaliyev, R., Trebukhov, S., Nitsenko, A., & Linnik, X. (2024). Recycling of beryllium, manganese, and zirconium from secondary alloys by magnesium distillation in vacuum. Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources, 331(4), 90–100. https://doi.org/10.31643/2024/6445.42

Most read articles by the same author(s)

1 2 > >>