Radial-shear rolling as a new technological solution for recycling bar scrap of ferrous metals
DOI:
https://doi.org/10.31643/2021/6445.06Keywords:
recycling, bar scrap of ferrous metals, reinforcement, radial-shear rolling, microstructure, mechanical properties.Abstract
Waste recycling of both ferrous and non-ferrous metals is a useful process for the economy of any country. This paper proposes a new technology for recycling bar scrap of ferrous metals by rolling it in radial-shear rolling mills by producing a commercial product in the form of bars with an ultrafine-grained gradient structure. Studies have shown that the deformation of bar scrap in the form of pieces of reinforcement made of steel grade 18G2S in a radial-shear rolling mill makes it possible to significantly disperse its structure by producing a gradient ultrafine-grained structure, and this, in turn, leads to the elevating of the mechanical characteristics of this steel grade. Thus, the tensile limit of the 18G2S grade steel deformed on the radial-shear rolling mill was 620 MPa (at the initial value of 365 MPa).
Downloads
References
Stepanova S.A.“Sozdanie obshchestva, orientirovannogo na resursosberezhenie.Iniciativa-3R”[“Creating of the resource-saving society. 3R Initiative”] Recikling othodov,2001 No6, 3-4. (In Rus.).
USA. Method of rolling flanged shapes/ Edwin E. Slick, 1914.(In Eng.).
USA. Rail recycle process/ Darrell B. McGahhey, 1991.(In Eng.)
Badyuk S.I., Leshchenko A.I. Poluchenie sortovyh profilej prokata iz iznoshennyh zheleznodorozhnyh rel'sov[Producing of section iron profiles from worn-out railway rails] // Obrabotka materialov davleniem. 2010. No4. -S. 162-167.(In Rus.).
Razrabotka sovremennoj resursosberegayushchej tekhnologii proizvodstva armaturnogo prokata i melyushchih sharov[Development of a modern resource-saving technology for the production of reinforcing bars and grinding balls] / Rozhkov G.K., Levandovskij S.A., Sarancha S.YU. i dr.// Modelirovanie i razvitie processov obrabotki metallov davleniem, 2019 No3 –S. 18-22. (In Rus.).
Bahtinov YU.B. O celesoobraznosti perekatki iznoshennyh rel'sov v sortovye profili [On the expediency of rolling worn-out rails into profiled sections] // Proizvodstvo prokata. 2000. No7. -S. 2-4.(In Rus.).
Tekhnologiya pererabotki zheleznodorozhnyh rel'sov na sortovoj prokat[The technology of processing railway rails to section iron]/ V.K. Smirnov, V.A. SHilov, A.M. Mihajlenko i dr.//Stal'. 1995. No2. -S.46-48.(In Rus.).
RF. Sposob izgotovleniya sortovogo metalloprokata iz fragmentov rel's [2541211RF. Method for the manufacture of section iron from rail fragments] / Matlashov A.M., 2015.(In Rus.).
RF. Sposob proizvodstva sortovogo prokata iz demontirovannogo zheleznodorozhnogo rel'sa [2574531 RF. Method for the production of section iron from a dismantled railway rail]/ Zlobin A.A., 2016.(In Rus.).
RF. Sposob perekatki zheleznodorozhnyh rel'sov [2511201 RF. Method of rolling railway rails] / Trajno A.I., Ivanov D.M., 2014. (In Rus.).
Galkin S.P. Radial shear rolling as an optimal technology for lean production// Steel in Translation. 2014. No44 (1). –Р. 61-64.(In Eng.).
RF. Sposob remonta shtang nasosnyh metodom plasticheskoj deformacii. [2356718 RF. Method for repairing pump rods by plastic deformation.]/ Bogatov N.A., 2009.(In Rus.).
Innovacionnaya tekhnologiya reciklinga nasosnyh shtang s primeneniem tekhnologii i ministanov radial'no-sdvigovoj prokatki v usloviyah OAO «Ocherskij mashinostroitel'nyi zavod»[Innovative technology for pump rods recycling with the use of technology and mini radial-shear rolling mills in the conditions of Ocher Machine-Building Plant OJSC] / Galkin S.P., Romancev B.A. i dr.// Inzhenernaya praktika, 2014. No9. –S. 58-61.(In Rus.).
Osachuk E.A. Remont nasosnyh shtang po principu goryachej radial'no-sdvigovoj vintovoj prokatki[Repair of pump rods by the principle of hot radial-shear screw rolling] // Inzhenernaya praktika, 2017. No1-2. –S. 17-22.(In Rus.).
Grevceva V.V., Galkin S.P. Eksperimental'noe oprobovanie tekhnologii povtornogo ispol'zovaniya zheleznodorozhnyh osej s primeneniem radial'no-sdvigovoj prokatki. [Experimental testing of the railway axles reuse technology with the use of radial-shear rolling.] / 72-e Dni nauki studentov NITU "MISiS", 2017. –S. 145-146.(In Rus.).
Galkin S.P., HaritonovE.A. Reversivnaya radial'no-sdvigovaya prokatka. Sushchnost', vozmozhnosti, preimushchestva [Reversible radial shear rolling. Essence, capabilities, advantages]// Titan. 2003. No1. -S. 39-45.(In Rus.).
Kenzhaliyev B.K., Berkinbayeva A.N., Dosymbayeva Z.D., SharipovR.H., Suleimenov E.N. Recycling multicomponent metallic domestic wastes using of the combined electrochemical reactions/ XXI IUPAC CHEMRAWN CONFERENCE, Rome, Italy,April 2016, pp. 6-8. (In Eng.).
Kenzhaliyev B.K., Kuldeyev E.I., Luganov V.A., Motovilov I.Y., Temirova S.S.Production of Very Fine, Spherical, Particles of Ferriferous Pigments from the Diatomaceous Raw Material of Kazakhstan. Glass andCeramics, 79(5), 194-198.
Kuldeyev E., Bondarenko I., Abdulvaliyev R., Temirova S., AbdikerimB.“Processing of low quality ekibastuz coals ashes and natural diatomites to obtain alumina and foamed glass”. Metalurgija, 59(3), 351-354.(In Eng.).
Kenzhaliyev B. K. Innovative technologies providing enhancement of nonferrous, precious, rare and rare earth metals extraction // Kompleksnoe Ispol’zovanie Mineral’nogo Syr’a (Complex Use of Mineral Resources). –2019. –No3 (310). –Page: 64-75. https://doi.org/10.31643/2019/6445.30 (In Eng.).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Lezhnev, S., Naizabekov, A., Volokitina, I., Panin Е., & Kuldeyev, E.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 Unported License.
