Promising ways to increase raw material base of the chrome industry of the metallurgical industry of the Kazakhstan

E.I. Kuldeyev; I.V. Bondarenko; S.S. Temirova

doi:10.31643/2020/6445.19

Authors

E.I. Kuldeyev Satbayev University, Almaty, Kazakhstan
I.V. Bondarenko Satbayev University, Almaty, Kazakhstan
S.S. Temirova Satbayev University, Almaty, Kazakhstan

DOI:

https://doi.org/10.31643/2020/6445.19

Keywords:

chromium-containing raw materials, material agglomeration, chromium pellets, refined ferrochrome slag, diatomite, ferrosilicon calcite fluxing.

Abstract

Various lumping technologies of finely dispersed chromite concentrates using charge roasting processes have been considered. In this respect, it was noted that the charge formulation used in the production does not provide the required strength of the produced pellets. The authors of the article propose the use of the well-known method for the ferrosilicon calcium fluxes (FSCF) synthesis with the replacement of Callovian clays with a composition based on diatomites and industrial and waste products of the Eurasian group (ERG) enterprises in order to increase the strength of pellets and agglomerate. This method enabled us to produce roasted pellets with high strength, to ensure the optimal ratio of components, to decrease the pellet roasting temperature by 150-200°C and to increase water resistance and congelation resistance. Technological parameters can be also improved by beneficiation of the source chromite raw material, effectively used by Turkish manufacturers of chrome products. One way to increase the chrome industry raw material base of the Republic of Kazakhstan is the involvement of the “12 Geophysical Deposit” into the processing of the industrial ore. However, the produced finely dispersed chromium concentrates require lumping followed by smelting in furnaces for ferrochrome. The high silica and iron content in the host rock of chromium concentrate enables to obtain strong pellets without additional additives.

Downloads

Download data is not yet available.

Author Biographies

E.I. Kuldeyev, Satbayev University, Almaty, Kazakhstan

Candidate of technical sciences, Satbayev University, "Institute of Metallurgy and Ore Beneficiation" JSC, Almaty, Kazakhstan.

I.V. Bondarenko, Satbayev University, Almaty, Kazakhstan

Senior researcher, Satbayev University, "Institute of Metallurgy and Ore Beneficiation" JSC, Almaty, Kazakhstan.

S.S. Temirova, Satbayev University, Almaty, Kazakhstan

Senior researcher, Satbayev University, "Institute of Metallurgy and Ore Beneficiation" JSC, Almaty, Kazakhstan.

References

Karpenko R.A., Gromov A.S. Ferritic-calcium flux-bonding (FCFB) for iron ore pellets [Electronic source]. URL: www.pandia.ru (Reference date is 01.07.2017).(in Russ.)

GzogyanT.N., Melnikov N.D., Altynbaev R.A., Gzogyan S.R. Composition features and properties of Mikhailovsky deposit Callovian clays. Mining Information and Analytical Bulletin (Scientific and Technical Journal). No. 5. 2003(in Russ.)

Povolotsky Ya., Roshchin V.Ye., Malkov N.V. Electrometallurgy of steel and ferroalloys. Moscow: Metallurgy. 1995. 491 p. (in Russ.)

Bondarenko, I. V., & Tastanov, E. A. (2019). Obtaining Multi-Component Pellets from Finely Dispersed Chromium Concentrates, Refined Ferrochrome Slags and Diatomite Raw Materials of Kazakhstan. Metallurgist, 62(11-12), 1213–1218. https://doi.org/10.1007/s11015-019-00776-0 (in Russ.)

Bondarenko I.V., Tastanov Y.A., Sadykov N.M.-K., Temirova S.S.// Roasted chrome pellets shives disposal technology in the conditions of Donskoy Mining and Processing Plant JSC that is branch of Kazchrome TNC JSC. 2020, Modern science, Technical sciences. Issue 1-2. Pp.217-222.(in Russ.)

E. Kuldeyev, I. Bondarenko, R. Abdulvaliyev, S. Temirova, B. Abdikerim. Processing of low quality ekibastuz coals ashes and natural diatomites to obtain alumina and foamed glass // Metalurgija. 2020. Issue 59. No3. Pp. 351-354.(in Eng.)

Kenzhaliev, B. K., Kul’deev, E. I., Luganov, V. A., Bondarenko, I. V., Motovilov, I. Y., & Temirova, S. S.(2019). Production of Very Fine, Spherical, Particles of Ferriferous Pigments from the Diatomaceous Raw Material of Kazakhstan. Glass and Ceramics, 76(5-6), 194–198. https://doi.org/10.1007/s10717-019-00163-w(in Eng.)

DonskoyGOK: The construction of the roasted pellet workshop is Kazakhstan ferrochrome demand-oriented [Electronic resource]. URL: www.infogeo.ru (Reference date is 30.09.2005). (in Russ.)

Volodin V. N., Tuleushev Y. Zh., Kenzhaliyev B. K., Trebukhov S. A. (2020). Thermal degradation of hard alloys of the niobiumcadmium system at low pressure. Kompleksnoe Ispolʹzovanie Mineralʹnogo syrʹâ/Complex Use of Mineral Resources/Mineraldik Shikisattardy Keshendi Paidalanu, 1(312), 41–47. https://doi.org/10.31643/2020/6445.05(in Eng.)

Kenzhaliyev, B. K., Surkova, T. Y., & Yessimova, D. M. (2019). Concentration of rare-earth elements by sorption from sulphate solutions. Kompleksnoe Ispolʹzovanie Mineralʹnogo syrʹâ/ComplexUse of Mineral Resources/Mineraldik Shikisattardy Keshendi Paidalanu, 3(310), 5–9. (In Eng.). https://doi.org/10.31643/2019/6445.22 (in Eng.)

Industrial furnaces and pipes. roasting furnace for constructional materials [Electronic source]. URL: www.bibliotekar.ru (Reference date is 22.04.2018). (in Russ.)

Kenzhaliyev B.K., Lokhova N.G., Kvyatkovskaya M.N. and Baltabekova Zh.A. (2020). Thermal Analysis for Determination of Individual REM Phases in Industrial Middling Product. International Journal of Advanced Science and Technology, 29 (7s), 01 -07.Retrieved from. http://sersc.org/journals/index.php/IJAST/article/view/9408 (inEng.)

Kuldeyev E.I., Bondarenko I.V., Temirova S.S., TastanovE.A., Nurlybaev R.E. Composition and properties of the diatomite raw materials of Kazakhstan and the synthesis of silicalcites based on them to obtain building products.// Kompleksnoe Ispolʹzovanie Mineralʹnogo syrʹâ/Complex Use of Mineral Resources/Mineraldik Shikisattardy Keshendi Paidalanu,–2018. –No4. –С. 140-148. https://doi.org/10.31643/2018/6445.41(in Russ.)