Device for automatic control of non-roundness and eccentricity of  small rotating parts

A.K. Atalykova; Ye.O. Yeleukulov; A.P. Muslimov

doi:10.31643/2027/6445.39

Authors

A.K. Atalykova Almaty University of Power Engineering and Telecommunications
Ye.O. Yeleukulov Almaty University of Power Engineering and Telecommunications
A.P. Muslimov Kyrgyz State Technical University

DOI:

https://doi.org/10.31643/2027/6445.39

Keywords:

small products, non-roundness of products, inspection accuracy, eccentricity, inspection device.

Abstract

In the field of mechanical engineering, one of the key tasks is quality control of manufactured products. Particular attention should be paid to quality control of small parts used in precision devices, metalworking machines, and equipment for the metallurgical and defense industries that operate at high rotational speeds. The aim of this study is to develop a device for controlling the out-of-roundness and eccentricity of rollers weighing up to 10 g. The paper proposes a device using a new method of free rotation of cylindrical products with a radius of r = 4 mm on support rollers rotating at a speed of up to 15000 rpm. The advantage of this work is that the geometric and kinematic parameters of the device were determined depending on the mass-geometric characteristics of the controlled products in the absence of radial displacement of the center of mass: e=0. Five products with a conditional displacement of the center of mass e=4; 6; 8; 12; 15 μm, artificially created by removing a certain amount of material from the average outer surface. The mass of the product before and after removal was determined on analytical scales. The number of measurements of one product at each roller rotation speed was n=12. Based on the data obtained, the average angle of product breakage from the rollers was calculated, which can be used to judge the quality of the controlled products: as the eccentricity increases, the angle at which the product breaks from the rollers decreases. The measurement accuracy of the device was evaluated for the case when measurements were taken for a product with e=8 μm at n_r=9000 rpm.

Downloads

Download data is not yet available.

Time and Location

This article covers a time period from to . Temporal properties of the article's content specified with a day resolution.

Location(s) or Area(s) The geometric shape(s) in blue represent the locations or areas of the article's content as provided by the authors. The administrative unit shown in a black rectangle represents the smallest administrative unit that encloses the spatial extent that the article is dealing with.

The administrative units enclosing the article's places are: Here the administrative units are listed, which are superior to the location(s) the article is dealing with, with the highest level on the left and the lowest on the right.

Temporal and spatial metadata are published under the following license: CC-0

Author Biographies

A.K. Atalykova, Almaty University of Power Engineering and Telecommunications

Senior Lecturer, Department of Automation and Control, Almaty University of Power Engineering and Telecommunications, Baytursynov str., 126/1, 050013, Almaty, Kazakhstan. ORCID ID: https://orcid.org/0000-0001-7517-2438

Ye.O. Yeleukulov, Almaty University of Power Engineering and Telecommunications

Professor of Practice, Department of Electronic Engineering, Almaty University of Power Engineering and Telecommunications, Baytursynov str., 126/1, 050013, Almaty, Kazakhstan. ORCID ID: https://orcid.org/0000-0001-6866-3941

A.P. Muslimov, Kyrgyz State Technical University

Doctor of Technical Sciences, Professor, Department of Automation and Robotics, Kyrgyz State Technical University, Ch. Aitmatov str., 66, 720044, Bishkek, Kyrgyz Republic. ORCID ID: https://orcid.org/0000-0001-7819-8510

References

Zhang H, Ma L, Xie F. A method of steel ball surface quality inspection based on flexible arrayed eddy current sensor. Measurement. 2019; 144(7):192–202. https://doi.org/10.1016/j.measurement.2019.05.056

Wang Y, Hadfield M. Failure modes of ceramic rolling elements with surface crack defects. Wear. 2004; 256(1-2):208–219. https://doi.org/10.1016/S0043-1648(03)00409-5

Bhadeshia HKDH. Steels for bearings. Progress in Materials Science. 2012; 57(2):268–435. https://doi.org/10.1016/j.pmatsci.2011.06.002

Pater Z, Tomczak J, Bartnicki J, Lovell MR. Experimental and numerical analysis of helical-wedge rolling process for producing steel balls. International Journal of Machine Tools and Manufacture. 2013; 67:1–7. https://doi.org/10.1016/j.ijmachtools.2012.12.006

Chen Y-J, Deng Y, Pu Y, Tang B, Su Y, Tang J. A real-time surface inspection system for precision steel balls based on machine vision. Measurement Science and Technology. 2016; 27(7):1¬–¬¬¬9. https://doi.org/10.1088/0957-0233/27/7/074010

Wang L, Snidle RW, Gu L. Rolling contact silicon nitride bearing technology. Wear. 2000; 246(1-2):159–73. https://doi.org/10.1016/S0043-1648(00)00504-4

Kakimoto A. Detection of surface defects on steel ball bearings in production process using a capacitive sensor. Measurement. 1996; 17(1):51–57. https://doi.org/10.1016/0263-2241(96)00007-3

Li G, Zhou Sh, Ma L, Wang Y. Research on dual wavelength coaxial optical fiber sensor for detecting steel ball surface defects. Measurement. 2019; 133:310–319. https://doi.org/10.1016/j.measurement.2018.10.026

Wang Y, Yang Y, Geng Y., Zheng M. Kinematic analysis of detection of steel ball surface defect based on ADAMS. Advanced Materials Research. 2010; 102–104:82–87. https://doi.org/10.4028/www.scientific.net/AMR.102-104.83

Abuazza A, Brabazon D, El-Baradie M.A. Multi-beam fibre-optic laser scanning system for surface defect recognition. Journal of Materials Processing Technology. 2004; 155–156:2065–2070. https://doi.org/10.1016/j.jmatprotec.2004.04.339

Zhang Q, Wu XL, Yang XX, Li HB, Feng H. Failure analysis of steel ball in the brake operating cylinder of heavy launch vehicle. Engineering Failure Analysis. 2016; 60:353-362. https://doi.org/10.1016/j.engfailanal.2015.11.056

Li Y, Wang G, Cui H, Cao Sh, Wang X. Dynamic characteristics and optimization research on PVDF piezoelectric film force censor for steel ball cold heading machine. Isa Transactions. 2019; 94:265-275. https://doi.org/10.1016/j.isatra.2019.04.021

ISO 2014 ISO 3290–1:2014(E) Rolling Bearings – Balls – Part 1: Steel Balls. 2014; 11.

Liu Qing. Detection and classification for surface defects of steel balls based on machine. Vision. 2013; 10:44-48.

Chyla P, Pater Z, Tomczak J. Numerical analysis of a rolling process for producing steel balls using helical rolls. Archives of Metallurgy and Materials. 2016; 61(2):485–492. https://doi.org/10.1515/amm-2016-0085

Yuhang Song, Zhong Wang, Fu Luhua, Jiang Meihua. Defection of surface defect on highly reflective curved surface using reflective fringe pattern. Mechanical Science and Technology for Aerospace Engineering. 2017; 36(8):1250-1254. https://doi.org/10.13433/j.cnki.1003-8728.2017.0817

Peter Gloeckner, Sebald W. A new Method of Calcuating the Attainable Life and Reliability in Aerospace Bearings. European Journal of Engineering and Technology Research. 2020; 5(6):745-750. http://dx.doi.org/10.24018/ejeng.2020.5.6.1977

Lazovic T, Marinkovic A, Atanasovska I, Sedak M, Stojanovic B. From Innovation to Standartization – A Century of Rolling Bearing Life Formula. Machines. 2024; 12(7):444. https://doi.org/10.3390/machines12070444

Atalykova A. Kontrol velichiny disbalansa izdelii metodom vrashcheniia izdeliia na vrashchaiushchikhsia oporakh [Monitor the amount of product unbalance by rotating the product on rotating supports]. Promyshlennost Kazakhstana =Industry of Kazakhstan. 2018; 3(104):65–68. (In Russ.).

Klyuyev VV. Mashinostroyeniye. Entsiklopediya [Mechanical engineering. Encyclopedia]. Moscow: Mechanical engineering. 1996, 464. (In Russ.).

Wang X, Sui X, Xue Y, Li J, Ma W, Liu C. Investigation on measurement for micro unbalance of tiny cylindrical rollers of the high-speed precision rolling bearings. ICMCCE. 2017; 71-74.

Sui X, Liu C, Li J, Xue Y, Yu Y, Cui Y. Laser-based measurement for micro-unbalance of cylindrical rollers of the high-speed precision rolling bearings. Cluster Computing. 2019; 22:9159-9167. https://doi.org/10.1007/s10586-018-2095-1