Titanium melt interaction with the refractory oxides of some metals

Authors

  • A.V. Panichkin “Institute of Metallurgy and Ore Beneficiation” JSC; Satbayev University
  • A.B. Imanbayeva “Institute of Metallurgy and Ore Beneficiation” JSC; Satbayev University
  • A.T. Imbarova “Institute of Metallurgy and Ore Beneficiation” JSC; Satbayev University

DOI:

https://doi.org/10.31643/2019/6445.16

Keywords:

titanium molten, refractory oxides, refractory material, reactional interaction.

Abstract

This article reviews perspectives of various refractory oxides application, including rare earth elements as fire resistance material to produce tiegels for titanium induction melting and titanium alloys. The interaction of titanium molten with calcium oxide, magnesium, zirconium, and the rare earth elements oxides: lanthanum, cerium, and yttrium were studied in theory and by testing. In order to assess the possibility of using oxides of these metals in the manufacture of refractories for Ti alloys melting, the thermodynamic calculations were performed using the Outotec HSC Chemistry 8 program. The Gibbs free energy of the reactions of interaction between titanium alloys with the listed oxides was calculated. The Gibbs energy was testified to have positive values in the high temperatures, which in theory means that they can be used as refractory materials in the smelting of titanium. The experiments of short-term interaction of titanium with the oxides of the listed elements were carried out under heating in a vacuum induction furnace. The interaction was evaluated by the change in the titanium structure after melting it in the volume of the pressed oxide powder. In the process of titanium melting with oxides of calcium and magnesium at high temperatures, an intense boiling and splashing are observed. This fact is explained by the titanium restores calcium and magnesium to the state of the metal, and the low boiling temperature of calcium and magnesium causes the release of a large amount of metal vapor. Titanium is heavily contaminated by the metals that form these oxides, and, therefore, by oxygen being in contact with La2O3, CeO2, and ZrO2. The yttrium oxide is testified to be the most resistant to the titanium melting, there is no significant contamination of the molten with yttrium and oxygen, and this increases the titanium hardness by 20%. The experiments have resulted in that it was recommended to use yttrium oxide as a refractory material.

Downloads

Download data is not yet available.

Author Biographies

A.V. Panichkin, “Institute of Metallurgy and Ore Beneficiation” JSC; Satbayev University

Cand. of Eng., Leading Research Associate, Head of the National Scientific Laboratory of General Use in the priority direction “The hydrocarbon and mining and metallurgical sectors technologies and related service industries”, Satbayev University, Institute of Metallurgy and Ore Beneficiation JSC, Almaty, Kazakhstan.

A.B. Imanbayeva, “Institute of Metallurgy and Ore Beneficiation” JSC; Satbayev University

PhD candidate, Junior Research Associate, Satbayev University, Institute of Metallurgy and Ore Beneficiation JSC, Laboratory of Metallurgy, Almaty, Kazakhstan.

 

A.T. Imbarova, “Institute of Metallurgy and Ore Beneficiation” JSC; Satbayev University

Research Associate, Satbayev University, Institute of Metallurgy and Ore Beneficiation JSC, Laboratory of Metallurgy, Almaty, Kazakhstan.

References

Bibikov E. L. Proizvodstvofasonnykhotlivokiztitanovykhsplavov(Production of shaped castings from titanium alloys)Moscow: Metallurgy. 1983.296. (in Russ.). http://cdotnntu.ru/basebook/Proizvodstvo_otlivka_iz_titanovih_splavov/files/assets/basic-html/page118.html

Panichkin A.V.,UskenbayevaA.M., ImanbayevaA.B. TemirgaliyevS.S.Dzhumabekov D.M.Vzaimodeystviyetitanovykhrasplavov s razlichnymitugoplavkimisoyedineniyami.(Interaction of titanium melts with various refractory compounds)Kompleksnoe Ispol’zovanie Mineral’nogo Syr’a.2016. 3.84-90. (in Russ.). www.kims-imio.kz

Abkovits.S..Dzh. Burke.,R. Khilts. Titan v promyshlennosti(Titanium in industry) M. 1957. 225. (in Russ.). https://www.researchgate.net/publication/328306777_slifovanie_detalej_iz_titanovyh_splavov

Gubchenko A.P. Sposobplavkimetalla v induktsionnoypechi s kholodnymtiglempatent RF. (The method of melting metal in an induction furnace with a cold crucible, RF patent)1998.(access date 20.03.2019) (in Russ.). http://www.findpatent.ru/patent/231/2319752.html

Gomes1a F., Barbosa J., Ribeiro С. S.Evaluation of Functionally Graded Ceramic Crucible for Induction Melting of TiAl Based Alloys.Advanced materials forum vi, pts 1 and 2 PesquisarPublicações da Ata de Conferência 6th International Materials Symposium /15th Meeting of SPM Guimaraes, PORTUGAL, 2011.769-774. (in Eng.). https://doi.org/10.4028/www.scientific.net/MSF.730-732.769

Frueh C. Attempts to develop a ceramic mould for titanium casting –a review.International Journal of Cast Metals Research.1996.9,4.233-240.(in Eng.). https://doi.org/10.1080/13640461.1996.11819664

Kostov A.,Friedrich B. Selection of crucible oxides in moltentitanium and titanium aluminum alloys bythermo-chemistry calculations. Journal of Mining and Metallurgy.2005.41. 113–125. (in Eng.). https://doi.org/10.2298/JMMB0501113K

B. Friedrich, J. Morscheiser, C. Lochbichler. Potential of ceramic crucibles for melting of titanium-alloys and gamma-titaniumaluminide.51st International Colloquium on Refractories 2008.16.229-232. (in Eng.).https://doi.org/10.13140/rg.2.1.2084.0562

F. Gomes.Induction melting of γ-Ti Al in CaOcrucibles.Intermetallics.2008.16.7.(in Eng.). https://doi.org/10.1016/j.intermet.2008.08.008

Aihui L., BangshengL., Hai N., Yanwei S., Jingjie G., HengzhiF.Study of interface reactions between TiAl alloys and four ceramic molds.Rare Metal Materials and Engineering.2008.37. 956-959. (in Eng.). https://doi.org/10.1016/S1875-5372(09)60028-X

Renjie C., Ming G., Hu Z., Shengkai G., Interactions between TiAl alloys and yttria refractory material in casting process. J Mat Proc Tech. 2010.210.1190–1196. (in Eng.). https://doi.org/10.1016/j.jmatprotec.2010.03.003

Joaquim B., Ribeiro S.Evaluation of Y2O3 as front layer of ceramic cruciblesfor vaccum induction melting of tial based alloys O.M.N.D. Teodoro, Caetano Monteiro,EPD Congress Edited by M.E. SchlesingerTMS (The Minerals, Metals & Materials Society),2005. 573-584. (in Eng.).

GomesF.,BarbosaJ.,RibeiroC. S.Evaluation of functionally graded ceramic crucible for induction melting of titanium based alloys.Materials science forum,2013.V. 730-732. P. 769-774 (in Eng.). https://doi.org/10.4028/www.scientific.net/MSF.730-732.769

Tetsui T., Kobayashi T., Mori T.Kishimoto1 T.,HaradaH.Evaluation of Yttria Applicability as a Crucible for Induction Melting of TiAl Alloy.The Japan Institute of Metals, Materials Transactions.2010.51,9.1656 –1662.(in Eng.). https://doi.org/10.2320/matertrans.MAW201002

Stefan S.,Christos G., AnezirisA.,Harry B.,Björn R, Bernd F. Investigating the corrosion resistance of calcium zirconate in contact with titanium alloy melts. Journal of the European Ceramic Society.2015.35.259-266.(in Eng.). https://doi.org/10.1016/j.jeurceramsoc.2014.08.031

SchaffönerS., QinT.,FruhstorferJ.,JahnC.,SchmidtG.,JansenH.,Christos G.A.Refractorycastables for titanium metallurgy based on calcium zirconate. Materials & Design.2018.148.78-86. (in Eng.). https://doi.org/10.1016/j.matdes.2018.03.049

Guangyao C., Baobao L.,Fuhao X.,Pengyue G.,HaoZh.,Xionggang L., Chonghe L.Pilot-scale experimental evaluation of induction melting of Ti-46Al-8Nb alloy in the fused BaZrO3 crucible. Vacuum.2019.159.293-298. (in Eng.). https://doi.org/10.1016/j.vacuum.2018.10.050

Kartavykh A.V.,Tcherdyntsev.V.V, ZollingerJ.TiAl–Nbmelt interaction with pyrolytic boron nitride crucibles.Materials Chemistry and Physics.2010.119.347-350. (in Eng.). https://doi.org/10.1016/j.matchemphys.2009.09.021

Kartavykh A.V.,TcherdyntsevV.V.,ZollingerJ. TiAl–Nbmelt interaction with AlN refractory crucibles.Materials Chemistry and Physics.2009.11.300-304. (in Eng.). https://doi.org/10.1016/j.matchemphys.2009.03.032

KenzhaliyevB.K., Chukmanova M.T. Tekhnologi iizgotovleniya individual'no razrabatyvayemykhendoprotezoviz titanovykh splavov(Technologies for manufacturing individually developed Endoprostesis from titanium alloys.Proceedings of International scientific and practical conference “The Effective Technologies of Non-Ferrous, Rare and Precious Metals Manufacturing.” Kazakhstan, 2018. 364-367. (inRuss.). https://doi.org/10.31643/2018-7.36

Downloads

Published

2019-05-13

How to Cite

Panichkin, A., Imanbayeva, A., & Imbarova А. (2019). Titanium melt interaction with the refractory oxides of some metals. Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources, 309(2), 51–60. https://doi.org/10.31643/2019/6445.16

Most read articles by the same author(s)