A cement clinker formation with the use of magnetite scarn ores washery refuses

О.А. Miryuk

doi:10.31643/2019/6445.09

Authors

О.А. Miryuk Rudny Industrial Institute

DOI:

https://doi.org/10.31643/2019/6445.09

Keywords:

magnetite skarn ores, man-made materials, thermal transformations, clinker burning, clinker formation processes, belite, alite.

Abstract

The clinker formation processes results of studies during the raw mixtures burning to contain magnetite skarn ores washery wastes are submitted. Chemical and mineral compound, thermal transformations of ore washery wastes are provided. The clinker phase formation features involving the man-made component of the raw mixture, which consist of the low-temperature interactions activity, the variety of intermediate phases are revealed. Abelite formation stages with the participation of actinolite, albite, andradite, grossular, diopside, chlorite, epidote are established to determine by gradual transformations of minerals into intermediate phases of C₂AS, C₃MS₂, out of which C₂S is formed at 1000 – 1300 °C. An alite formation is intensified due to high-temperature belite formation and doping impurities. The possibility of cement clinkers basicity reducing due to the chemical and mineral characteristics of man-made raw materials is substantiated. The influence of rough ore washery refuses on the alite crystallization nature is investigated, which is manifested in the microvolumes formation differing in the amount and viscosity of the liquid phase. The use of polyfractional refuses gristing was revealed to increase the proportion of highly active fine-crystalline alite, contributing to the cement stone strengthening. The thermal calculations results show 18 – 34 % decrease of heat costs to clinkers formation of different basicity when using ore refuses.

Downloads

Download data is not yet available.

Author Biography

О.А. Miryuk, Rudny Industrial Institute

Doctor of Technical Sciences, Professor, Rudny Industrial Institute, Rudny, Kazakhstan.

References

TaymasovB.T., Khudyakova T.M., Zhanikulov N.N., Khashimov A.N. Protsessy klinkeroobrazovaniya v maloenergoyemkikh syryevykh shikhtakh (Clinker formation processes in low-energy raw materials). Tsement i ego primeneniye = Cement and its application. 2018. 1, 170–175. https://jcement.ru/magazine/504/18899/(in Russ.).

Tyukavkina V., Kasikov A., Mayorova E., Gurevich B., Neradovskiy Yu. Pererabotka otvalnykh shlakov medno-nikelevogo proizvodstvas polucheniyem kremnezemsoderzhashchikh dobavok dlya vyazhushchikh (Processing of waste slags of copper-nickel production with the production of silica-containing additives for 35455565750.770.870.95Saturation FactorМСPCFuel equivalent consumption, kg/t of clinker binders).Ekologiya i promyshlennost Rossii = Ecology and Industry of Russia. 2015. 11, 13–17. https://doi.org/10.18412/1816-0395-2015-11-13-17(in Russ.).

Sidikova T.D. Stroitelnyye materialy iz otkhodov proizvodstva (Building materials from industrial waste). Sovremennoye stroitelstvo i arkhitektura = Modern construction and architecture. 2016.1, 50–52. https://doi.org/10.18454/mca.2016.01.9(in Russ.).

Iskandarova M.I., Atabayev F.B. Tsementy. soderzhashchiye dobavku otkhodov gorno-pererabatyvayushchey promyshlennosti (Cements containing the additive waste from the mining industry).Tsement i ego primeneniye = Cement and its application. 2017.6, 96–99.https://jcement.ru/magazine/501/18791/(in Russ.).

Usov B.A.,Okolnikova G.E., Akimov S.Yu. K voprosu sostoyaniya innovatsionnykh napravleniy razvitiya proizvodstva stroitelnykh materialov iz otkhodov promyshlennosti (To the question of the state of innovation in the development of the production of building materials from industrial waste).Ekologiya i stroitelstvo = Ecology and Construction. 2017. 1, 14–25. https://doi.org/10.24411/2413-8452-2017-00007(in Russ.).

Dahhou M., Moussaouiti M.E., Arshad M. A., Moustahsine S.,Assafi M. Synthesis and characterization of drinking water treatment plant sludge-incorporated Portland cement. Journal of Material Cycles and Waste Management. 2018. 20, 891–901. https://doi.org/10.1007/s10163-017-0650-0(in Eng.).

Miryuk O.A. Synthesis of Special Clinkers with the Use of Technogenic Raw Materials.Key Engineering Materials. 2018. 769, 9–16. https://doi.org/10.4028/www.scientific.net/KEM.769.9(in Eng.).

Kavas T., Angelopoulos G.N., Iacobescu R. I.Production of belite cement using boron and red mud wastes. Cement Wapno Beton. 2015.5, 328–334 (in Eng.).

Vinnichenko V., Ryazanov A.Ecological indices of manufacture of Portland cement clinker and production of the dolomite clinker.MATEC Web of Conferences. 2017. 116, 01020. https://doi.org/10.1051/matecconf/201711601020(in Eng.).

Tsakiridis P.E., Oustadakis P., Agatzini-Leonardou S. Black dross leached residue: an alternative raw material for portland cement clinker.Waste and Biomass Valorization. 2014. 56, 973–983. https://doi.org/10.1007/s12649-014-9313-8(in Eng.).

Faure A., Smith A., Coudray C., Anger B., Colina H., Moulin I., Thery F. Ability of Two Dam Fine-Grained Sediments to be Used in Cement Industry as Raw Material for Clinker Production and as Pozzolanic Additional Constituent of Portland-Composite Cement. Waste and Biomass Valorization.2018.9, 2143-22163. https://doi.org/10.1007/s12649-017-9973-2(in Eng.).

Mukunoki T., Hoai T.T., Fukushima D., Komiya T., Shimaoka T. Physical and mechanical properties of municipal solid waste incineration residueswith cement and coal fly ash using X-ray Computed Tomography scanners. Frontiers of Structural and Civil Engineering.2018. 10, 1–13.https://doi.org/10.1007/s11709-018-0502-6(in Eng.).

Wu Q.,Wu Y.,Tong W., Ma H. Utilization of nickel slag as raw material in the production of Portland cement for road construction. Construction and Building Materials.2018. 93,426–434. https://doi.org/10.1016/j.conbuildmat.2018.10.109(in Eng.).

Garcia-LodeiroI., Carcelen-TaboadaV., Fernández-JiménezA.,PalomoA.Manufacture of hybrid cements with fly ash and bottom ash from a municipal solid waste incinerator. Construction and Building Materials. 2016. 105,218 –226. https://doi.org/10.1016/j.conbuildmat.2015.12.079(in Eng.).

Soltani A., Tarighat A., Varmazyari M. Calcined Marl and Condensed Silica Fume as Partial Replacement for OrdinaryPortland Cement. International Journal of Civil Engineering.2018. 16, 1549–1559. https://doi.org/10.1007/s40999-018-0289-9(inEng.)