Porous composite material based on liquid glass
DOI:
https://doi.org/10.31643/2022/6445.35Keywords:
composite material, liquid glass, technogenic filler, porous granules, lightweight concrete.Abstract
The article presents the results of experimental studies of a composite material obtained on the basis of liquid glass and mineral fillers of technogenic origin. The structure of the composite material is formed by porous granules bonded with a liquid-glass matrix. The porous filler is synthesized from a mixture of liquid glass and combined filler (cullet, flake overburden, coal mining waste, and ash microsphere). Regulation of composition and content of the filler in the raw mixture ensures porous granules production with a bulk density of 270 – 330 kg/m3. Analysis of mathematical models reflecting the dependence of the density and strength of the composite material on the composition of the moulding mixture allowed us to establish a reasonable ratio between the liquid glass and the filler, the matrix, and the porous filler. Optimal proportions of the composite material are characterized by a density of 450 – 600 kg/m3and compressive strength of at least 5.5 MPa. Strong adhesion of the liquid-glass matrix to the surface of the porous filler ensures the resistance of the composite material to diverse effects. The structure of the materials was studied by electron microscopy. The development of composite material is aimed at improving the energy efficiency of construction.
Downloads
References
Liu S, Zhu K, Cui S, Shen X, Tan G. A novel buildingmaterial with low thermal conductivity: Rapid synthesis of foam concrete reinforced silica aerogel and energy performance simulation. Energy and Buildings. 2018;177:385-393. https://doi.org/10.1016/j.enbuild.2018.08.014
Zhang X, Qu N, Li J., Development and functional characteristics of novel foam concrete. Construction and Building Materials.2022; 324 (21): 126666. https://doi.org/10.1016/j.conbuildmat.2022.126666
Hou L, Li J, Lu Z, Niu Y, Li T. Effect of nanoparticles on foaming agent and the foamed concrete. Construction and Building Materials. 2019;227:116698. https://doi.org/10.1016/j.conbuildmat.2019.116698
Yong H, SiongT, Lim K, Ling Y, Chuan L, Ming F, Yew K. Environmental impact and quality assessment of using eggshell powder incorporated in lightweight foamed concrete. Construction and Building Materials. 2020;244(30):118341. https://doi.org/10.1016/j.conbuildmat.2020.118341
Kumar KN, Vijayan DS, Divahar R, Abirami R, Nivetha C. An experimental investigation on light-weight concrete blocks using vermiculite. Materials Today: Proceedings. 2020;22(3):987-991. https://doi.org/10.1016/j.matpr.2019.11.237
Cerny V, Kocianova M, Drochytka R. Possibilities of lightweight high strength concreteproduction from sintered fly ash filler. Procedia Engineering. 2017;195:17-23. https://doi.org/10.1016/j.proeng.2017.04.517
Miryuk О.Cellular Structure Formation of Composite Materials. Lecture Notes in Civil Engineering. 2022;170:123-133. https://DOI:10.1007/978-3-030-79983-0_12
Bhutta MAR, Hasanah N, Farhayu N, Hussin MW, Tahir M, Mirza J. Properties of porous concrete from waste crushed concrete (recycled filler). Construction and Building Materials. 2013;47:1243-1248. https://doi.org/10.1016/j.conbuildmat.2013.06.022
Miryuk OA, Zagorodnyuk LH. Granular materials based on expanded sands and their production waste. Kompleksnoe Ispol’zovanie Mineral’nogo Syr’a= Complex Use of Mineral Resources. 2022;321(2):14-21. https://doi.org/10.31643/2022/6445.13
Pasupathy K, Ramakrishnan S, Sanjayan J. Formulating eco-friendly geopolymer foam concrete by alkali-activation of ground brick waste. Journal of Cleaner Production. 2019;325:129180. https://doi.org/10.1016/j.jclepro.2021.129180
Silva RC, Kubacki ET, Tenório-Neto ET, Lima-Tenório M.K, Tebcherani SM. Foam glass using sodium hydroxide as foaming agent: Study on the reaction mechanism in soda-lime glass matrix. Journal of Non-Crystalline Solids. 2019;511:177-182. https://doi.org/10.1016/j.jnoncrysol.2019.02.003
Martha C, Chaipanich A. Phase characterizations, physical properties and strength of environment-friendly cold-bonded fly ash lightweight fillers. Journal of Cleaner Production. 2018;171:1094-1100. https://doi.org/10.1016/j.jclepro.2017.09.259
Sangulova IB, Selyaev VP, Kuldeev EI, Nurlybaev RE, Orynbekov YS. Assessment of the influence of the structural characteristics of granular systems of microsilicon on the properties of thermal insulation materials. Kompleksnoe Ispol’zovanie Mineral’nogo Syr’a = Complex Use of Mineral Resources. 2022;320(1):5-14. https://doi.org/10.31643/2022/6445.01
Monich PR, Romero AR, Hollen D, Bernardo E. Porous glass-ceramics from alkali activation and sinter-crystallization of mixtures of waste glass and residues from plasma processing of municipal solid waste. Journal of Cleaner Production. 2018;188:871-878. https://doi.org/10.1016/j.jclepro.2018.03.167
Mizuryaev SA, Chiknovorian AG, Solopova GS, Demidov RV. Some aspects of the development and application of silicate expanded fillers in lightweight concrete structures. Procedia Engineering. 2016;153:599-603. https://doi.org/10.1016/j.proeng.2016.08.199
Yio M, Xiao Y, Ji R, Russell M, Cheeseman C. Production of foamed glass-ceramics using furnace bottom ash and glass. Ceramics International. 2021;47(6):8697-8706. https://doi.org/10.1016/j.ceramint.2020.11.103
Qu YN, Su ZG, Xu J, Huo WL, Song KC, Wang YL, Yang JL. Preparation of ultralight glass foams via vacuum-assisted foaming. Materials Letters. 2016;166:35-38. https://doi.org/10.1016/j.matlet.2015.12.027
Hesky D, Aneziris CG, Gro U, Horn A. Water and waterglass mixtures for foam glass production. Ceramics International. 2015; 41 (10):12604-12613. https://doi.org/10.1016/j.ceramint.2015.06.088
Miryuk О, Fediuk R, Amran M. Foam Glass Crystalline Granular Material from a Polymineral Raw Mix. Crystals.2021;11:1447. https://doi.org/10.3390/cryst11121447
Moghadam MJ, Ajalloeian R, Hajiannia A. Preparation and application of alkali-activated materials based on waste glass and coal gangue. Construction and Building Materials. 2019;221:84-98.https://doi.org/10.1016/j.conbuildmat.2019.06.071
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Miryuk О.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 Unported License.