Reduction melting of metal-containing industrial wastes without carburizing of metal alloy
DOI:
https://doi.org/10.31643/2018/6445.32Keywords:
waste, ore, coke, steel, iron, alloy, chromium, manganese, carbon, reduction, melting.Abstract
Metallurgical processing of group iron-manganese-chromium-containing raw materials and the production of steel and alloys are the fundamental basis of the industry. At the same time, they represent a significant part of the gas emissions into the atmosphere and solid waste accumulated in dumps. The traditional technology for the production of steel and alloys is based on the use of agglomerated raw materials, as a result of the preparation and processing of which the formation and accumulation of small and metal-containing waste takes place. For today, effective processing of them remains the problem of metallurgical sector. The present work is devoted to solving this problem on the basis of accumulated metal-containing waste of metallurgical and mining enterprises. Experimental studies on the preparation of ore-coal pellets from waste, their metallization and reduction melting in laboratory installations were performed. Based on the analysis of the results of experimental studies, a technology for reducing smelting of metal-containing waste has been developed. It is shown that as a result of the technology implementation, high-quality steels and alloys without carburizing of metal can be obtained, bypassing the stages of production of cast iron and high-carbon alloys. The experimental research method consists in preparation of dispersed metal-containing and carbon-containing industrial wastes of ore-coal mixtures with stoichiometric consumption of coal for recovering recoverable metals, and the obtaining of ore-pellets that are further subjected to metallization and reduction melting. As a result of the implementation of the proposed technology, samples of manganese-containing alloy steels with a carbon content in the range 0,44-0,52%, manganese 3,5-7,2%, and chromium-containing alloy steels with a carbon content in the range 0,42-0,46%, chromium 4,45-9,27% were received.
Downloads
References
Efimenko G.G., Gimmelfarb A.A.,Levchenko V.E.Metallurgiya chuguna(Metallurgy of pig-iron). Kiev: Vishcha shkola. 1981, 496.(in Russ.).
VegmanE.F.,ZherebinB.P.,PokhvisnevA.N.,YusfinYu. S.,KurunovI.F.,ParenkovA.E.,ChernousovP.I.. Metallurgiya chuguna.Uchebnik dlya vuzov. 3-e izd.pererab. i dop.(Metallurgy of pig-iron. Textbook for high schools). Moscow: IKTs«Akademkniga». 2004,774.(in Russ.).
Kudrin V.A. Metallurgiya stali(Metallurgy of steel). Moscow: Metallurgy. 1981. 287.(in Russ.).
Shmele Peter.,Bado Khans. Proizvodstvennyye moshchnosti po vyplavke chuguna v mire(Production facilities for the smelting of pig iron in the world).«Metallurgicheskoye proizvodstvo i tekhnologiya metallurgicheskikh protsessov» = «Metallurgical production and technology of metallurgical processes».2008. 2,22-28.(in Russ.).
GasikM.I.. Lyakishev M.P.. Emlin B.I. Teoriya i tekhnologiya proizvodstva ferrosplavov: Uchebnik dlya vuzov(Theory and technology of production of ferroalloys. Textbook for high schools). Moscow: Metallurgy. 1988, 784.(in Russ.).
Leontyev L.I.,Smirnov L.A.,Zhuchkov V.I.,Dashevskiy V.Ya. Proizvodstvo stali i ferrosplavov v mire (Manufacture of steel and ferroalloys in the world). Elektrometallurgiya =Electrometallurgy.2008. 2,2–9.(in Russ.).
Yusfin Yu.S.,Pashkov N.F. Metallurgiya zheleza: uchebnik dlya vuzov (Metallurgy of iron: textbook for high schools). Moscow: IKTs «Akademkniga». 2007. 464. (in Russ.).
Leontyev L.I.,Sheshukov O.Yu.,Nekrasov I.V. Analiz pererabotka i ispolzovaniye tekhnogennykh otkhodov metallurgicheskogo proizvodstva(Analysis of processing and use of technogenic wastes of metallurgical production).Kompleksnoe ispolzovanie mineral’nogo Syr’a = Complex use of mineral resources.2014. 4, 8 –25.
Kurunov I.F.Thedirectproductionofironandalternativestotheblastfurnaceinironmetallurgyforthe21stcentury.Metallurgist.2010. 54.5-6.335–342. (in Russ.). https://doi.org/10.1007/s11015-010-9300-7
Smirnov N.A. O vnedrenii innovatsionnoy tekhnologii pryamogo vosstanovleniya zheleza(On the introduction of innovative technology for direct reduction of iron). Elektrometallurgiya = Electrometallurgy.2011.4,46-47.(in Russ.).
Lyungen Kh.B.,Knop K.,Steffen R. Sovremennoye sostoyaniye protsessov pryamogo i zhidkofaznogo vosstanovleniya zheleza(Current state of the processes of direct and liquid-phase reduction of iron)Chernyye metally = Ferrous metals.2007.2, 13-25.(in Russ.).
Gaines H., Joyner K., Peer Günter. Steel times Int.2008. 32.7, 17-18. (in Eng.).
Khelling M.,Veng M.,Gellert S. Analiz proizvodstva gubchatogo zheleza s ispolzovaniyem vodoroda(Analysis of the production of sponge iron using hydrogen).Chernyye metally = Ferrous metals.2018.3, 6-11.(in Russ.).
Tleugabulov S.M.,Kiyekbayev E.E.,Koyshina G.M.,Aldangarov E. Pryamoye vosstanovleniye metallov –vysokotekhnologichnoye proizvodstvo(Direct reduction of metals -high-tech production). Stal = Steel.2010.2, 4-8.(in Russ.).
Tleugabulov S.M.,Abikov S.B.,Altybaeva D.K., Isupov Y.D., Tleugabulov B.S. Reductive Smelting of Iron Ore.Steel in Translation.2015.45.5, 351–355. https://doi.org/10.3103/S0967091215050162
Tleugabulov S.M.,Tleugabulov B.S.,Koishina G.M.,Altybaeva D.K., Tazhiev E.BSmelting Reduction of a Monocharge.Metallurgist.2016.60.1-2, 31–37.(in Russ.). https://doi.org/10.1007/S11015-016-0248-0
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Tazhiev, E., Tleugabulov, S., Ryzhonkov, D., & Koishina, G.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 Unported License.
